Extra BASE

FORCE DETECTING UNIT

Measure every stroke on your other equipment, too. If you have more paddles or oars, glue the BASE on each of them.
BASE is the second element of the force measurement sensor. It is glued to the shaft and stores the calibration and characteristics of the paddle or the oar.

Combined with the TRACKER, it maintains more complex data collecting.

You are required to have an active PaddleMate app subscription to access all the PRO features and data .
Find nearest reseller
Buy local. Contact your nearest distributor
Search resellers

Select a sport

65  excl. VAT

TAKE PADDLEMATE POD ANYWHERE

POD is small, light and secure. It is ready to ride on any waves

POD is a small, lightweight force sensor that is no wider than the width of the shaft

Don’t worry about running out of juice, the battery lasts for up to 5 hours

POD is securely attached to the BASE which is glued hard to the shaft

NEVER MISS A STROKE

The POD provides the accurate data you need to push limits and reach goals

Track your sport specific metrics with maximum precision

Give access to your training data for your coach

Measure K2 or K4 at the same time and see the synchronized data in one graph

See your metrics real-time or stream it to your coach live from the water

 

METRICS

Force (Average, Peak)

Force curves

Distance per stroke

Pace (average, max)

Speed (average, max)

Time (Total, split times)

Distance

Zones (Force, Pace, Speed, Heart Rate)

INSIDE THE BOX

Everything you need to maximise your performance

POD - Force sensor

BASE - Force detecting unit

DOCK - Charger device

USB-C Cable

Calibrating stands

Carrier bag

POD

The POD is the brain of the system. It has a battery and Bluetooth module that transmits the data to the phone or TRACKER.

  • Specification

    Unit dimensions (LxWxD):
    48 mm x 20 mm x 12 mm
    Weight: 12 g
    Battery: Li-Po 120mAh
    Battery life: 5 hours (under normal conditions)
    Charging time: 1 hour
    Bluetooth version: 5.0 LE
    Open field range: 20 m

BASE

It is the force detecting unit glued to the shaft. It has a memory and stores the paddle or oar calibration and characteristics. For each paddle you will need a new BASE but you can keep using the same POD.

  • Specification

    Unit dimensions (LxWxD):
    61 mm x 25 mm x 20 mm
    Weight: 12 g

    POD+BASE:
    Unit dimensions (LxWxD): 61 mm x 25 mm x 21  mm
    Weight: 24 g

DOCK

When you are not using the POD, the DOCK is used to carry and charge it. It can be used with any charger and a USB-C cable. Charging time is 1 hour for the POD.

  • Specification

    Unit dimensions (LxWxD):
    70 mm x 25 mm x 20 mm
    Weight: 14 g

If you have more paddles,
glue the BASE on each of them

BUY EXTRA BASE

ACQUIRE EVEN MORE DATA WITH THE TRACKER
(GPS AND DATA COLLECTING UNIT)

ORDER TRACKER HERE

QUICK AND EASY INSTALLATION

GLUE IT UP:Look at the center line of the blade (where it is the widest) and glue the BASE perpendicular between the hands with the glue in the package.

WAIT FOR 5 MINUTES:For the BASE to set perfectly, the glue must dry for at least 5 minutes.

CALIBRATE IT:Lay the paddle on the table, start the calibration in the app and follow the instructions. You will also need a weight.

NOW PULL!You’re done, head for the water. Pull and ride!

 

TESTIMONALS

"I especially like the fact that PaddleMate is also available for junior athletes, because in order to educate future champions, they already need to be provided with the best technical conditions."
“I am very happy thanks to PaddleMate. A sport-specific measurement tool will now be available to us, as so far we have only been able to use sportwatch to analyze workouts.”
"I especially like the fact that PaddleMate is also available for junior athletes, because in order to educate future champions, they already need to be provided with the best technical conditions."

THE DECISION TO PURCHASE YOUR POD IS SIMPLE

Worry-free returns

2-Year Warranty

World Class support

BUYING FOR A TEAM OR FEDERATION?

Contact our sales team for volume pricing and other team specific details

CONTACT A TEAM SPECIALIST